Stan FPV 2604 2410kv Pro Motors T-Mount

Stan FPV 2604 2410kv Pro Motors T-Mount Style
The T-Mountversion has the same 5mm shaft and nut as all other 5″ motors, fits existing props and is meant for5″-6″ Cinematic, Freestyle, and Racing builds.

The new T-Mount is theabsolute strongestandmost powerful T-Mountever made! No joke! Here’s the story: I originally designed this motor specifically for myCine-Bird XLso that it could handle larger 5″ and 6″ props on 3s and 4s. For these larger T-Mount props we couldn’t use aluminum like usual because the intense force of even spinning would strip them and we needed toretain the 5mm internal shaftand under screw (no C-clip ) so TMotors engineers and I went back to the drawing board to solve these problems and theresult is absolutely fantastic!

The T-Mount version 2604 is even “lower” than the 5mm (only 13.5mm high!) and it iscompletely invisible on the Cine-Bird XL!! It is perfect for the Cine-Bird XL for 5″ and 6″ T-Mount props and also 4″-6″ toothpick builds!

PerfectforALLtypes of5″ mini-quads!
CINEMATIC / FREESTYLE / RACING
These motors are an entirenew sizeand therefore an entirelynew flight feelandcharacteristics!The 2604 size islike nothing you’ve ever flown before!MORE POWERandSMOOTHERatTHE SAME TIME!

Designed 100% by Stan FPVandmanufactured by T Motorwith theirhighest quality materialsavailable – this motor istop shelfin terms ofeverything! Nothing was spared and evennew technologies were madeto facilitate what Stan needed for his own professional work and aftermonths of design and testingit is finallyavailableto everyone andIN-STOCK!

We made thefull 5mm hollow titanium shaftslammed as low as it could be for improved durability and had it move up thru the lowered motor until it gets the the top then it branches out toaccept T-Mount bolt threads right into the titanium! Mixed withhard steel M2 T-Mount boltsthat come with the motors there is avery secureandstrong connectionthat won’t strip out even in crashes! And when the6″ T mount propscome out they arealready designed to work withthese motorsvery well on the Cine-Bird XL or 6″ Toothpick builds running 3s-4s!! (6″ T mount props are on the way.

SPECIFICATIONS:

Suggested Prop (T-Mount):HQ T5x3 or T5x2x3

Motor Mount Hole Size:16×16

Prop Mount Options:T-Mount

Motor Stator Size:2604

KV (Revolutions per Volt):2410kv

Weight (T-Mount w/ wires):29.1g

Shaft:5mm Hollow Titanium

Bearings:EZO

Wire Length:170mm x 20AWG

Lipo Cell (prop size – cell):4″ – 5s / 5″ – 4s / 6″ – 3s

Includes:

• (1) Stan FPV 2604 2410kv Pro Motor
• (1) 5mm Prop Nut (5mm Mount Version)
• (2) M2x8 Steel T-Mount Screws (T-Mount Version)
• (4) M3 Frame Mounting Screws