Matek Systems M8Q-5883 SAM-M8Q GPS & QMC5883L Compass Module for RC Drone FPV Racing

Specification:
Brand name: Matek
Item name: GPS & compass module M8Q-5883
Dimensions: L20 x W20 x H10 mm
Weight: 7 gram
Input voltage range: 4~6V
Uart (Tx,Rx) interface for GPS SAM-M8Q
I2C (DA,CL)interface for Compass QMC5883L
Battery for HOT module start
Power LED(Red) & Time pulse LED(Blue)
Supported by INAV/Betaflight/Ardupilot, ect.

Features:
-72-channel M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C

-On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking-Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity-Build-in embedded GNSS patch antenna, low power consumption-The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size
to be integrated in any design.-Magnetic sensor QMC5883L integrated-Max navigation update rateSingle GNSS up to 18 Hz2 Concurrent GNSS(GPS & GLONASS) up to 10 Hz-Horizontal position accuracy(GPS & GLONASS) 2.5 m CEP-Velocity accuracy 0.05m/s-Cold start 26 sAided cold starts: 2 sHot start 1 s-SensitivityTracking & Navigation: 165 dBmReacquisition: 158 dBmCold start: 146 dBm

Hot start: 155 dBm

Tips:

-GPS, GLONASS, SBAS, QZSS are enabled by default-Blue PPS LED blinking(1Hz) means 3D fixed-update rate 1Hz & baudrate 9600 default-Baud 9600~115200 supported by INAV/BF/Ardupilot-Compass Alignment(Arrow forward):INAV/BF: CW 270 FlipArdupilot/Mission Planner: Rotation None-BF doesnt support GPS position hold and RTH, GPS Rescue mode is supported by BF3.5 or last.-No need compass for Fixed wings with INAV firmware-The scratches on ceramic antenna are the result of tuning the antenna by ublox.

u-center Windows

Package included:
1xM8Q-5883 module
1xSH1.0-6P 20cm silicon wire
1x Transparent PVC Heat-shrink tube