Sale! DescriptionMAMBA F722S APP I2C WIFI F50PRO 3-6S Flight Controller StackFirmware Target /ConfigMamba F722 I2CAbout WIFI APPDiagram Link From Help Centre LinkNoteSince STM32F722 heat large please leave at least 5mm interspace at both sides of the FC with not
MAMBA F722S APP I2C WIFI F50PRO 3-6S Flight Controller Stack
About WIFI APP
Diagram Link From Help Centre Link
NoteSince STM32F722 heat large please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.
Update Details:
BT to WiFi
USB power supply can use receiver, OSD
Add a group of I2C pads (SCL SDA)
Add inverterDual-WayTX serial port
Add 2812 LED switch function, key can turn off led
Add 4 corner LED interface to support BF led and Mamba led
Upgrade to stronger type-C, optimize pad position
FC Specifications
MCU: 216MHz STM32F722RET6 32BIT
IMU: MPU6000
Barometer: No
OSD: BF OSD
Blacbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: RX6
LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
LED Controller:BF LED/MB LED 4 Set 2812 LED
WIFI: SpeedyBee APP
Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
TVS Protection: Yes
BEC: 5V 2.5A & 9V 2A (Max 3A)
MOUNTING: 30.5mm/M3 WEIGHT: 9g
Supply :
8pin sh1.0 *1
Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
VTS Protection: Yes
ESCSpecifications
F50 BL32
INPUT VOLTAGE: 3~6S Lipo (12.6V~25V)
CONTINUE CURRENT: 50A4
BURST CURRENT: 60A (10S)
BEC: NO
ESCDshot300/600/1200
MOUNTING: 30.5mm/M3
Supply : Panasonic High Frequency 470uF/35V
Mounting: 30.530.5mm,3
Dimensions:
Weight: 22g
Including
1MAMBA F722 APP F50 BL32
About SpeedyBee Function
ForWIFI
ForBlueTooth
Cost: $25
Free Shipping
We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.
Delivery Time:
It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.
Reviews
There are no reviews yet.