iFlight SucceX Mini F4 V3 + 35A 2-6S TwinG BLHeli32 Stack (ICM20689)

The SucceX Mini F4 V3 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 4 UARTs With its clean intuitive layout, the SucceX MINI F4 V3 TwinG makes installation a breeze with 10 pin connectors that allows simple plug and play connection with your 4in1 ESC.

But the real magic of this flight controller lies in its TWIN GYRO configuration.

The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other. Betaflight uses GYRO FUSION to blend and average the information from both gyros to send a much cleaner signal to the PID loop controller! Less noise and fewer oscillations across the throttle band without adding any delay! Betaflight software filters can be lowered in most cases as well, which brings a significant decrease in delay.

With plenty of processing power and UARTS, this is the perfect flight controller for long-range GPS builds, as well as micro quads, cinematic filming rigs, and X-Class racers!

Specifications

SucceX Mini F4 V3Flight Controller

• MCU: 168MHz STM32F405
• Gyro2x ICM20689
• Blackbox32MB
• Betaflight OSD: YES
• BEC: 5V 2.5A
• Current sensor scale: 100
• Inverter for SBUS input (UART2-RX)
• Smartaudio & Tramp VTX protocol supported
• Beeper Pad: Yes
• RSSI input pad: No
• UARTs4
• BLHeli32 TelemetryRX6
• Input voltagerecommended 2-6S, MAX 8S
• Target: STM32F405 (CLI config necessary; Check SETUP GUIDE above)
• Mounting pattern: 20*20mm 3
• Dimensions: 27*27mm

SucceX Mini 35A V3ESC

• MCU: STM32F051K66
• Up to 48kHz PWM frequency
• Capacity: 220uf/35V uF
• Current Sensor: Yes
• Input: 2-6s lipo
• Constant: 35A / Burst: 40A
• BlHeli32 telemetry: Yes
• Supports up to Dshot1200, Proshot, Oneshot, Multishot
• Target: iFlight-BL32-4IN1
• Weight:16.7g
• Mounting pattern: 20*20mm 3
• Dimensions: 31*31mm(including the power pads)

Includes

• 1 x SucceX Mini 35A V3 4 in 1 ESC
• 1 x SucceX Mini F4 V3 TwinG Flight Controller
• 1 x 35v 470uf Capacitor
• XT60 Pigtail
• Hardware Set

VTX not included.