iFlight SucceX-D F7 V2.2 Stack (F7+50A ESC)

PRODUCT DESCRIPTION

The SucceX-D F7 V2.2 is designed to work seamlessly with DJIs new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.

Features

• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires.)
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• Designed to support DJI Digital FPV.

FC // SucceX-D F7 V2.2 TwinG F722 With Baro

• MCU: STM32 F722
• GyroMPU6000
• Baro: DPS310(Barometer can only be used with Betaflight 4.3.0 and above)
• Blackbox32MB
• Betaflight OSD: YES
• BEC: 5V 2.5A / 9V 2.5A
• Current sensor scale: 100
• Inverter for SBUS input (UART2-RX)
• Smartaudio & Tramp VTX protocol supported
• Beeper pad : Yes
• RSSI input pad: No
• UARTs5
• Motor outputs: 8
• 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
• 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
• BLHeli32 TelemetryRX5
• Input voltagerecommended 2-6S, MAX 8S
• Firmware target:IFLIGHT_F722_TWING
• Mounting pattern: 30.5*30.5mm 4mm with Grommets3mm
• Dimensions: 36*36mm
• Weight: 8.1g
• USB type-C

Changelog:

Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements implemented.

Before BMP280 changed to DPS310

Before target BTFL4.2.4 changed toIFLIGHT_F722_TWING

ESC // SucceX 50A

PRODUCT DESCRIPTION

Features:

– 6 layers double-sided PCB board;

– 2OZ copper skin thickness for 1-4 layers,better operating load capacity;

-Standard 20*20 4mm mounting holes,rational layout, countersunk holes on extended power soldering pad enable each layer board can be powered;

– Supports DShot DShot150/300/600/MultiShot/ OneShot etc.

Specification:

– Dimension: 31*29.5mm

– Mounting Holes: 20*20mm/4mm

– Weight: 10.8g

– Supports2-6Slipo input

– MCUG071

– Constant: 55 Amps

– Burst: 60 Amps

– Current sensor: Yes

– BEC: No

-Current rate: 100

– Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

–Firmware: BLHeli 32

– Target: iFlight-G071-4IN1

Package Included:

– SucceX 55AV24-in-1 ESC * 1pc

– Power cables & ESC signal wires * 1set