Caddx Ratel Starlight 1200TVL HDR Low-Light Micro FPV Camera 2.1mm lens RED

Caddx Ratel Starlight 1200TVL HDR Low-Light Micro FPV Camera 2.1mm lens Color: RED

It’s rare that an FPVcamera works both as a low-light and daytime flying camera. You usually cannot have one with the other, but Caddx has made this possible with the Ratel! In addition to having differentcolor and lens sizes, there is also the choice of an ND8 filter to help with contrast and light filtering when flying in bright conditions and also reduce jello a small amount.

The Caddx Ratel has superb night vision performance in addition to an excellent daytime image with ultra-low latency.Equipped with high quality 1/1.18″ Inch starlight HDR sensor, providing up to 0.0001 Sensitivity of lux. With the OSD menu, you can switch between PAL and NTSC video standards, or between 4:3 and 16:9 video formats. Ultra-low latency of 8ms means you feel locked in with your video.

The 1.66mm lens option gives you a super wide FOV (180) to see all around you.

Features

• High quality 1/1.18″ Inch starlightHDR sensor
• OSD menu
• Switch between PAL and NTSC video standards or between 4:3 and 16:9 video formats
• Ultra-low latency of 8ms
• 2.1mm Lens Version
• Specification
• • Brand Name:Caddx
  • Item Name:Ratel
  • Color:Red, Yellow
  • Lens:1.66mm, 2.1mm
  • Image Sensor:1/1.8″ Inch starlight HDR sensor
  • Horizontal Resolution:1200TVL
  • FOV:180 Degree
  • Min. Latency:8ms
  • TV System:NTSC & PAL (changeable)
  • Image:16:9 & 4:3 (changeable)
  • WDR:Super WDR (HDR)
  • Min. Illumination:Starlight
  • Synchronization:Internal
  • Electronic Shutter:PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio:>60dB (AGC OFF)
  • Video Output:CVBS
  • Camera OSD:Separate OSD
  • DNR:3-DNR
  • Language:ENG/FRANCE/RUS/SPA/PU/KOREA/CHN/JAPAN
  • Day/Night:Auto/Color/B&W/EXT
  • Dimensions:19mm*19mm*19mm
  • Wide Power Input:DC 5-40V
  • Work Temperature:-20~+60C
  • Work Humidity:20%~80%
  • Weight:8g (N.W.)/ 40.5g (G.W.)

  Includes

  • Camera x1
  • Aluminum bracket x1
  • 5D-OSD menu board x1pcs
  • 4pin FPV silicone cableA (extend into a 2pin joint for OSD board and a 3pin joint for FPV) x1
  • FPV silicone cable B (2-pin port for both side) x1
  • Internal hexagonal wrench x1
  • Screws set x1
  • Warranty card x1