BrainFPV Radix 2 H7 Flight Controller 30×30

NEW! BrainFPV Radix 2 H7 Flight Controller!!
(Custom Graphical OSD, Baro, Stackable)

New sexy look. Powerful AF. It is plug-n-play with RADIX 2 FC, includes a 10 pin cable, 8S, 160A/220 burst, current sensor, CLEAN power, 5v/2A voltage reg (can be switched to 10v for powering a camera or digital FPV system).

RADIX 2 Flight Controller Features:

• New Processor:STM32 H7 processor running at 480 MHz with 1 MB RAM
• New Gyro:New Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance
• New Baro:Latest generation Bosch Sensortec BMP388 barometer accurate altitude readings
• Better OSD:Improved full graphical on-screen-display (OSD) with gray levels and transparency
• Dual camera input:Camera can be switched using a switch on the RC transmitter
• VTX pit switch: to turn on/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage. Switch has an integrated high-speed resettable fuse to prevent damage due to accidental shorts
• 32 MByte built-in flash memory:30 MByte available for logging and settings storage
• Driverless flashingwith the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers
• RGB status LEDwith customizable color
• 8 motor outputs:all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESCs).
• 6 serial ports (UARTs):all with integrated inverters for S-BUS and other inverted protocols
• I2C portfor external sensors
• RGB LED output
• Buzzer output
• Camera controloutput for configuring analog cameras
• Analog RSSI input
• 5 V regulatorwith 1.5 A output and up to 8S (35 V) input voltage
• USB Type-C connector
• Size: 37 x 37 mm (30.5 mm hole spacing)
• Weight: 7g
• Firmware support: Betaflight, iNav planned
• NOTE: You can use 24-in-1 ESCs for an octocopter. Holy mother of FPV!

Includes:

• RADIX 2 flight controller
• PDB Not included!
• Sweet stickers Included
• Silicone anti-vibration grommets 4x
• 5-pin cable for motor outputs 5 to 8
• BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)